Cable Pulling Socks for 12-150mm Cables Rated 10-30KN
Product Overview
Pulling a power cable is where most jacket damage happens — unless the pull point grips evenly. The SWL sock solves this with a high-tensile steel weave that wraps the cable 360 degrees, holding diameters from 12mm to 150mm at working loads of 10-30KN. A reinforced collar anchors the weave where it meets the pulling line, and the hot-dip galvanized finish stands up to coastal atmospheres. Contractors reach for it at overhead terminations, substation hook-ups, underground pulls and emergency repairs.
Technical Specifications
|
Item No.
|
Model
|
Applicable Cable Dia. (mm)
|
Rated Load (KN)
|
Weight (kg)
|
|
21361
|
SWL-16
|
Φ12-16
|
10
|
0.8
|
|
21362
|
SWL-20
|
Φ16-20
|
10
|
0.8
|
|
21363
|
SWL-25
|
Φ20-25
|
15
|
1.0
|
|
21364
|
SWL-37
|
Φ25-37
|
15
|
1.0
|
|
21365
|
SWL-50
|
Φ37-50
|
15
|
1.0
|
|
21366
|
SWL-60
|
Φ50-60
|
25
|
2.4
|
|
21367
|
SWL-80
|
Φ60-80
|
25
|
2.4
|
|
21368
|
SWL-100
|
Φ80-100
|
25
|
2.4
|
|
21369
|
SWL-120
|
Φ100-120
|
30
|
2.6
|
|
21370
|
SWL-150
|
Φ120-150
|
30
|
2.6
|
Applications
· Terminating overhead line cables
· Connecting cables at substations
· Pulling cable through underground ducts
· Temporary fixing during outage repairs
Product Advantages
· 360 Degree Interwoven Grip — the steel weave closes around the whole cable circumference with even pressure, so the jacket stays undamaged through the pull.
· 40 Percent Stronger Hold, 30 Percent Faster Fit — compared with conventional connectors the grip is 40 percent stronger while rigging takes 30 percent less time.
· High-Tensile Steel with Reinforced Collar — the collar takes the pulling strain and keeps the connection firm for 12-150mm cables.
· Hot-Dip Galvanized Protection — the anti-corrosion coating is made for salt air, humidity and years of outdoor service.
Product Tags:
|
|
Hot-Dip Galvanized Cable Pulling Sock for 12-150mm Cables with 10-30KN Rated Load Images
|
